Mayku Multiplier MMUA22100AA, Инструкция по установке и эксплуатации

Страница: 31 / 42

6 MAINTENANCE
Opening or modifying the machine will void your warranty and could cause serious injury or
death.
6.1 How to maintain the machine
Product maintenance by non-skilled persons
6.1.1 Cleaning and lubrication
Cleaning the seal:
1. Use a damp microfiber cloth and clean the seal in a circular motion, making sure the seal
is seated properly into the dome.
Cleaning the mesh:
1. Locate screws
2. Unscrew
3. Clean with damp cloth
Cleaning the heat sensor:
1. Use dry compressed air to remove any debris or obstructions.
2. Use a cotton swab to gently clean the sensor.
Lubricating the rails:
1. If the rails are running dry and making a grating sound, apply a small amount of lithium
based lubricant to the rails. Do not use any type of dry lubricant (PTFE powder, graphite
powder, etc.) with any recirculating ball or roller type of bearing. While these lubricants
are good for sliding motion, they do very little to aid rolling friction.
Cleaning the heat reflector:
1. Clean the reflector with a microfibre cloth, avoiding the heaters where necessary.