INSTALLATION GUIDE
www.maykke.com
INSTALLATION GUIDE
TOOLS AND MATERIALS NEEDED:
Installation:
PHILLIPS SCREWDRIVER
Before beginning please read all installation instructions and observe all local safety and building
codes.
Inspect all products before installing. Contact Customer Service for any questions or concerns at 877.659.2858
or email: [email protected].
Consult a professional if you are unfamiliar with faucet installation. We accept no liability for damages
to property or person during installation.
1.Thread the faucet body through the center mounting hole.
2.Insert the handle bodies up through the mounting holes.
3.Secure the handle assemblies to the handle bodies.
4.Attach the hand shower to the mounting service.
5.Thread the mounting hardware and brass T onto the faucet body and tighten to secure.
6.Place the handle assemblies on the handle bodies. Make sure that both handles are in the off
position and, using the set screw, tighten in place with provided Allen wrench.
7.Connect the main water supply to the faucet body.
8.Once installation is complete, turn on the water supply, making sure that no water is leaking. Leave
water on for approximately one minute to insure installation is correct.
REV.08022017
