Mayer TM 2432, Руководство по эксплуатации

Страница: 26 / 44

26
•
Tight-screw the plate to the holding down bars using self-
locking nuts.
•
Set the drilling slide to lower position.
•
Apply a suitable spindle on the drill and slide them on shaft
of the motor then fix them by means of a threaded pin.
•
Set the required drilling depth roughly by using an empty
pot.
•
Drilling depth may be adjusted by shifting the rod in the
sleeve and fixing them to each other by means of the
threaded pin.
•
Then make a test drilling with a pot filled up with soil and
check the drilling depth, readjust if necessary.
•
When soft plastic, grided or Jiffy type pots are used,
pressing force of the press plate shall be set by using
clamping pieces.