Mayer TM 2432, Руководство по эксплуатации

Страница: 10 / 44

10
2 General safety instructions
1 Due diligence of the operating company
The Mayer TM 2432 potting machine was designed
and built taking a danger analysis into consideration
and after careful selection of the harmonised
standards to be complied with as well as other
specifications. It therefore meets the state of the art
and guarantees a maximum degree of safety.
However, only if all the measures required for such
are taken can this safety be achieved in actual
operational practice. Planning these measures and
checking their implementation is subject to the
operating organisation's duty to take due care.
The operating organisation must in particular
guarantee that:
•
… the machine is only used in accordance with
its intended use (cf. Product description).
•
… the machine is only operated when in
flawless working order and, especially, that the
working order of the safety equipment is
regularly checked.
•
… the Operating Instructions are always
available in legible condition and complete at
the location where the machine is used.
•
… only sufficiently qualified and authorised
personnel operate, service and repair the
machine.
•
… these personnel are regularly instructed
about all relevant matters concerning industrial
safety and environmental protection and that
they know the Operating Instructions and
especially the safety instructions they contain.
•
… none of the safety and warning signs
attached to the machine are removed and that
all remain legible.
•
Users must obligate themselves only to ever
operate the machine when it is in flawless
condition.
•
No unauthorised conversions or alterations are
allowed that influence safety of the machine.
•
Only when it has stopped, must any work ever
be carried out on the machine.
•
Before beginning with any work on the machine,
secure its drives and accessory parts against
being switched on unintentionally.
•
The protective devices may only be removed
when the machine has been stopped.
•
Local safety and accident-prevention
regulations always apply to any operation of the
machine.