MAYAH FLASHMAN II, Руководство по эксплуатации

Страница: 52 / 91

Front panel user Interface > Menu structure
52
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
NOTE:
How detailed the connection type is displayed depends on service provider
·
connection time (if not connected 0)
·
connection quality (best, good, sufficient, bad)
·
signal strength (graphic & text)
- 3 bars: best
- 2 bars: good
- 1 bar: sufficient
- no bar: bad
- blinking: no connectivity
·
provider: Service provider ID
·
current local IP-address (as delivered by provider)
·
IP- or SIP-address of connection partner
· input bit rate (IBR) in kbps
· output bit rate (OBR) in kbps
· jitter in ms
· lost packets
These are packets lost during transmission and cannot be recovered.
· dropped packets
These are packets received in a wrong sequence order. Since delay buffer is
not big enough these packets cannot be reordered and therefore they're
dropped. This can be improved by setting a higher delay buffer (see
Codec/
Setup/Interface/Ethernet ) and/or by activation of the AJC (see System/Misc/
AJC )
e) WLAN
· current protocol: SIP, RTP
·
connection time (if not connected 0)
·
connection quality (best, good, sufficient, bad)
·
signal strength (graphic & text)
- 3 bars: best
- 2 bars: good
- 1 bar: sufficient
- no bar: bad
- blinking: no connectivity
·
current local IP-address
·
IP- or SIP-address of connection partner
·
input bit rate (IBR) in kbps
· output bit rate (OBR) in kbps
· jitter in ms
· lost packets
These are packets lost during transmission and cannot be recovered.
·
dropped packets
These are packets received in a wrong sequence order. Since delay buffer is
not big enough these packets cannot be reordered and therefore they're
dropped. This can be improved by setting a higher delay buffer (see
Codec/