Stand 40-0414
English
page 4 of 13
Screwing the base pedestal together
1.
Centre the 4 base plates around the spot determined for the main axis of your ALBATROS
giant parasol. Each of the corners with three threads must point to the main axis. The
bottom layer of the steel plates must have 3 threads.
2.
Determine the correct position of AZ256 / AZ257 / AZ258 / AZ259 after careful calculation
of the main axis of the parasol. Allow enough clearance between parasols or from walls.
Parasols that are located too close together wear sooner.
Parasols may sway slightly. If there is not enough space between them, they may
touch and abrade or scour the canopy fabric at the spoke ends.
Make sure that there is a safety clearance of approx. 25-30 cm between the
parasols (or between parasol and the wall of the house).
3.
Put the placement hinge in a position that will allow enough space for the parasol to be
erected and dismounted.
main axis
Caution
distance depending on size of parasol
