Stand 40-0414
English
page 3 of 13
Functioning of the placement hinge
The placement hinge will not function if the total height is not correctly
dimensioned.
If item AZ256 / AZ257 / AZ258 / AZ259 has, by mistake, been ordered and
installed with the wrong height measurements, do at least make sure that the
bottom component is not set too far down in the ground. If there is a difference
of more than 50 mm between the top of the lower anchor tube and the floor
surface, the placement hinge cannot be tilted and the parasol cannot be erected.
Moreover, the electrician will not be able to run the power cables.
Be sure to measure and specify the correct total height for installation.
Caution
wrong height
measurement: too
short for installation
height
measurement
necessary for
correct
installation
lower edge of
steel anchor
plate
