21
1
22
3
A
8
Assembly Step 2.1:
Fix the front stand tube (22) with two screw sets (3) to the moveable main tube (21). Place the moveable main
tube (21) with the guide bushing onto the bolt on the fixed main tube (1) and fix it with screw set (A).
Caution:
Be very careful putting the moveable tube (21) onto the bolt. Make sure that the guide bushing on the moveable
tube (21) does not get damaged and ensure that it is sitting straight and not squint.
Secure the moveable main tube (21) with the safety pin (29).
Caution:
Please only tighten the screws hand tight until all components have been assembled correctly. Only after this
should the screws be tightened firmly.
Assembly
