Maxxus CX 9.1, Инструкция по установке и эксплуатации

Страница: 6 / 36

26
49
1
2
52
52
95
47
6
Carefully unpack all delivered parts. Have someone there to help you as some of the training device parts are
bulky and heavy.
Check that all the parts and fixing materials (screws, nuts, etc.) have been delivered.
Assemble the parts carefully as any damages or defects occurring due to mistakes made at the time of assem-
bly are not covered by the warranty or guarantee. Therefore, read through the assembly instructions carefully
before you start assembling, follow each assembly step exactly as described and keep to the correct sequence
of assembly as instructed. Take care of your own safety especially during assembly. Wear suitable work gloves
and get a second person to help you with large or heavy parts. Secure any moving parts so that no parts of the
body can get jammed in them during assembly. Assembly of the training device must be carried out thoroughly
by adults only.
Assemble the training device in a location which is level, clean and clear of obstructions. 2 people are required
to carry out the assembly. Training can only start when the training device has been fully assembled.
Step 1: Assembly of the Base Frame
Insert the main frame (2) on the front mount of the slide frame (1) and fasten it on the right and left using two
Allen screws M10x70 (26), two spring washers Ø10 (52) and two washers Ø10 (47). From the front fasten the
frame using two hexagon socket screws M10x90 (95), two spring washers Ø10 (52) and two corrugated wash-
ers Ø10.5 (49).
Assembly