Maxxus 7.8, Инструкция по установке и эксплуатации

Страница: 6 / 40

A12
B13
B13
B30
B30
A12
B13
A12
B13
B30
A01
C04
C04
C04
6
Step 1: Assembly of the Slide Frame
Put both round caps in the holes of the base frame (A01) and the slide frame (A12) - Fig 1.1 and 1.2. Undo and
remove the six pre-assembled screws (B13) and curved washers (B30) from the base frame mount (A01) – Fig
2. Then slightly loosen the two hexagon socket screws (B13) on the slide frame (A12) - Fig 3. Slide the three
tube ends of the slide frame (A12) onto the three appropriate rear mounts on the base frame (A01). Now put
back and fix slide frame (A12) to the rear mounts on the base frame (A01) with the removed screws (B13),
curved washers (B30) – Fig 4. Finally, re-tighten the loosened hexagon socket screws (B13) on the end of the
slide frame – Fig 5.
Fig. 1.1 Fig. 1.2
Fig. 2 Fig. 3
Fig. 4 Fig. 5
Assembly