Maxxus 7.8, Инструкция по установке и эксплуатации

Страница: 10 / 40

B41
A02
A16
A13
A14
B29
B30
B28
A04
10
Step 6: Assembly of the Fixed Handle Bar
Feed the cable protruding out of the top of the handle bar shaft (A02) and the cable from the fixed handle bar
(A16) through the opening in the cockpit holder plate – see circled part diagram. Only pull out the cable ends
far enough to connect them with the cockpit. Then attach the fixed handle bar (A16) using two hexagon socket
screws (B41) to the top end of the handle bar shaft (A02).
CAUTION:
Make sure that the cables do not get damaged or jammed during assembly of the fixed handle bar.
.
Step 7: Assembly of the Pendulum Tube Handles
Place the left handle (A13) into the mount of the left pendulum tube (A03). Then fix the handle (A13) with two
carriage bolts (B28), two curved washers (B30) and two locking nuts (B29). Repeat this procedure with the right
pendulum tube handle (A14). Both handles are marked clearly with a sticker and so are easy to identify
correctly.
Assembly