Maxxus 600354-00019-0001, Инструкция по установке и эксплуатации

Страница: 7 / 32

7
ENG
Assembly
Step 2: Assembling the Front Stabiliser
Loosen and remove the transport lock on the front mount of the base frame (1) and then remove the transport
lock.
Then attach the front stabiliser (40) using four Allen screws M10x20 (108) and four corrugated washers M10
(112) to the front mount of the base frame (1).
Step 3: Assembling the Pedals
Loosen the screw (109) on the left pedal arm (24). Then insert the thread of the left pedal (38) into the mount of
the left pedal arm and screw it tight in an anticlockwise direction. Now tighten the screw (109) again. Proceed
in the same way with the right pedal (39). Make sure that this pedal is tightened in a clockwise direction. The
pedals are easy to identify because they are marked “R” for right and “L” for left.
Transport Lock
108
108
112
112
1
40