Maxxus 6.4, Инструкция по установке и эксплуатации

Страница: 5 / 32

M8x55
Side frame, right
Side frame, right
Cover, right
Cable
Side frame, right
Side frame, left
M8x15
M8x15
Side frame, left
Side frame, left
Cover, left
Cockpit
5
ENG
Carefully unpack all delivered parts. Two people are required as some parts of your exerciser are
bulky and heavy.
Check the quantities of the fastening materials and components before starting assembly (screws,
nuts, etc.). Carefully perform the installation as damage or defects caused by assembly errors are
not covered by the warranty or guarantee under any circumstances. Please read the instructions.
When assembling, follow the sequence of assembly steps exactly and follow the instructions for
each assembly step.
The installation of the training device must be carried out by competent adults. Perform the instal-
lation of your exercise equipment in a location that is level, clean and free from obstructions. Carry
out the assembly with two people. Only start using your training device after completely finishing
installatio.
Step 1:
Connect the cable that protrudes down from the right side frame with the cable that comes out of the
base frame.
Insert the right side frame into the base frame and secure it laterally with two hexagon socket screws
M8x55 and from the front with two domed head hexagon socket screws M8x15.
Insert the left side frame into the base frame and secure it laterally with two hexagon socket screws
M8x55 and from the front with two domed head hexagon socket screws M8x15.
Step 2:
Connect the cable that protrudes from the top of the right side frame to the cable that protrudes from
the cockpit.
Insert the cockpit into the upper openings of the two side frames and then secure it with two domed
head hexagon socket screws M8x15.
ATTENTION : Make sure that you do not squeeze or damage the cable.
Step 3:
Insert the two covers at the joint between the base frame and the side frames.
Assembly