MAXXMEE 02389, Руководство по эксплуатации

Страница: 18 / 46

EN
16
■
Do not cover the device or
the heating attachment during
charging to prevent overheating.
NOTICE – Risk of Damage to
Material and Property
■
The device or the heating
attachment must be switched
off when they are connected to
or disconnected from the mains
power.
■
Make sure that the connecting
cable is not squashed, bent or
laid over sharp edges and does
not come into contact with hot
surfaces.
■
When the USB mains adapter is
pulled out of the plug socket,
always pull on the USB mains
adapter and never the USB
cable.
■
Do not pull or carry the device
by the USB cable.
■
Use only original accessories
from the manufacturer in order
to guarantee that there is no
interference that may prevent
the device from working and to
avoid possible damage.
■
Protect the device from heat
sources, naked flames, sub-ze-
ro temperatures, persistent
moisture, wet conditions and
impacts.
CHARGING UP THE
BATTERY
Please Note!
■
A USB mains adapter corre-
sponding to the technical data
of the device or the heating
attachment is also required
(see rating plate or “Technical
Data”). This is not supplied with
the device.
■
Risk of a short circuit! Do not
stick any conducting objects
(e. g. a screwdriver or similar
implement) into the charging
sockets.
■
Charge the device and the heat-
ing attachment only in closed
rooms.
■
Do not charge the device or the
heating attachment in rooms
with high humidity.
It is essential that you charge up
the battery of the main unit ( 2 ) and
the heating attachment ( 12 ) fully
before you first use the device in
order to achieve the maximum
charging capacity.
1. Plug the USB-C connector of
the USB cable into the charging
socket ( 6 ) on the device or on
the back of the heating attach-
ment and the USB connector
into the socket of a suitable USB
mains adapter.
2. Connect the USB mains adapter
to a plug socket that is easily
accessible. The charge con-
trol lamp ( 7 ) on the device or
heating attachment lights up