Hand-held Vacuum Cleaner
EN
15
USE
Please Note!
■
Do not use the device if there is vis-
ible damage to the device or acces-
sories.
■
Ensure that there are no sharp objects
on the surface which is to be cleaned.
■
In the event of damage / faults, switch
the device off immediately.
■
Note the
MAX
marking of the dust
container and empty the dust contain-
er as soon as it is reached. Regularly
clean the fi lters to prevent the motor
from overloading (see “Cleaning and
Storage”).
The process of detaching and attaching
the dust container is described in “Clean-
ing and Storage” – “Cleaning the Dust
Container and Filters”.
Before you fi rst use the device,
press the
On / Off switch (
8
) 3 x
in quick succession to release the
transport lock.
1. Select a nozzle as required and plug it
into the suction opening (
15
):
○
The
upholstery nozzle
(
4
) is used for
vacuuming upholstery and textiles.
(
Picture D
)
○
The
crevice nozzle
(
5
) is suitable
for places which are hard to get to,
such as corners, crevices or recess-
es. (
Picture E
)
○
The fl exible
extension nozzle
(
6
)
makes it easier to reach the tops
of cupboards, ceilings, corners or
radiators, for example.
(
Picture F
)
The device can also be used without
an additional nozzle.
2. The device is operated using the
On / Off switch as follows:
press 1 x: switch on suction level I
press 2 x: increase suction power (suc-
tion level II)
press 3 x: switch off
3. When the device is switched on, the
operating lamp (
10
) is lit. Guide the
suction opening / nozzle over the
surface to be cleaned. Switch the
device off after each surface has been
cleaned. This will increase the operat-
ing time on each battery charge.
4. After vacuuming, switch off the de-
vice, empty or clean the dust contain-
er (
13
) (see “Cleaning and Storage”)
and charge the battery in the charg-
ing station (see “Charging Up the
Battery”).
CLEANING AND STORAGE
Please Note!
■
Do not use any sharp or abrasive
cleaning agents to clean the device
and accessories. They may damage
the surfaces.
• Wipe down the motor unit (
11
), the
nozzles (
4, 5, 6
) and the charging
station (
2
) with a damp, soft cloth if
necessary. Then dry with a soft cloth.
• Regularly remove hair and fl uff from
the nozzles.
Emptying the Dust Container
1. Hold the device over an open dust-
bin. The distance from the dustbin
should be as small as possible so
that the dust does not spread in the
surrounding air.
2. Open the dust container (
13
): Press
the release button (
14
) and fold away
the end piece with the suction open-
ing. The dirt which has been sucked
up will drop out. (
Picture G
)
3. Then fl ip it shut until you hear the end
piece engage.
02378_02483_Inlay_de-en-fr-nl_A5_V1.indb 15
02378_02483_Inlay_de-en-fr-nl_A5_V1.indb 15
06.07.2020 11:40:30
06.07.2020 11:40:30