EN
16
ATTACHING THE WALL
MOUNTING BRACKET
Please Note!
■
Use the fi xings which are also sup-
plied to hang up the wall mounting
bracket. If you are unsure whether
the fi xings supplied are suitable for
the wall, seek advice from a specialist
retailer.
■
Hang the wall mounting bracket in a
secure and fi xed position.
■
Before drilling, ensure that there are
no pipes or cables behind the intend-
ed drilling point.
1. Place the wall mounting bracket (
G
)
against the wall and mark out two drill
holes (at the top and bottom).
2. Drill holes into the wall and place
anchors in them.
3. Screw the wall mounting bracket onto
the wall.
ACCESSORIES
The
fl oor nozzle (F)
is suitable for both
carpets and hard fl oors.
The foot switch allows you to change be-
tween carpet and hard fl oor. For hard fl oors,
a brush is extended on the underside of the
fl oor nozzle. The fl oor nozzle can only be
used with the extension tube (
D
).
The
combi nozzle
(
B
) is a combination of
a small crevice nozzle and brush nozzle.
Press the release button on the brush
attachment and slide it upwards at the
same time to turn the crevice nozzle into a
brush nozzle (
Picture C
). The brush attach-
ment must be heard to engage in place:
○
The crevice nozzle is suitable for up-
holstery, cleaning the inside of cars
and for all nooks and crannies.
○
The brush nozzle is used for vacuum-
ing upholstery and textiles and for
removing dust from delicate objects
such as picture frames, lamp shades,
keyboards, books etc.
The
crevice nozzle (A)
is suitable for places
which are hard to get to, such as corners,
crevices or recesses. Upholstery and all
nooks and crannies that cannot be reached
with other nozzles. The crevice nozzle can
only be used with the motor unit (
C
).
The
extension tube (D)
is intended to be
used with the fl oor nozzle (
F
) for cleaning
fl oors (
Picture D
). In addition,
it makes it
easier to reach ceilings and corners.
The
nozzle adapter
(
E
) is required to at-
tach the combi nozzle (
B
) to the extension
tube (
D
).
The
wall mounting bracket
(
G
) is suitable
for storing the device in a space-saving
manner.
USE
Please Note!
■
Make sure that there are no large,
sharp objects on the surface which is
to be cleaned.
■
Note the
MAX
marking of the dust
container. If the marking is reached
during use, empty the dust container.
Empty and clean the dust container
after every use. The fi lters must also
be regularly cleaned in order to pre-
vent overloading of the motor.
■
Switch off the device after you fi nish
cleaning each surface to increase the
operating time on each battery charge.
The device cannot be operated
when it is connected to the mains
power. Disconnect the connecting
cable (
H
) prior to use.
1. Select a nozzle (see the “Accesso-
ries” chapter) and plug it into the
suction opening (
11
). You must hear it
engage. For a longer reach, plug the
extension tube (
D
) in between.
Содержание 01839
Страница 40: ......
