Page
3
of
4
Wiring Instructions (continued)
Step 8
“Simultaneous Flash” – or – “Alternate Flash”
To flash all lamps synchronously, join all yellow wires together. This allows the lights to communicate with
each other.
To use alternate or “wig-wag” flash, identify lamps in “Group 1” and “Group 2”; Connect White wires in
“Group 1” to +12V.
NOTE:
Optional Amber Turn Signal is disabled when Flashing Warning light is on.
NOTE:
Activating the Back-up will disable the Warning light.
Step 9 (Optional)
To use the
optional “Mode 2” Flashing Warning pattern, a DPDT (double-pole, double-
throw) switch is required.
See below diagram.
