M85427R-YCL Installation Manual
Maxxima
M85427R-YCL
5.5" Round Flange Mount, Combination Stop/Turn/Tail (STT), Backup, Flashing
Warning, and Optional Amber Turn Signal.
1)
4” Round Red 12 LED Stop, Tail, and Optional Red Turn Signal.
All DOT FMVSS108 compliant.
2) 9 LED White Back-Up Light.
DOT FMVSS108 compliant.
3) Optional 9 LED Amber Turn Signal.
DOT FMVSS108 compliant.
4) Flashing Warning Light: Single Color 9 LED or Dual-Color 18 LED.
SAE Class 1 Compliant
Specifications:
LEDs
30 (12 Red/9 White/9Amber)
Voltage
12.8VDC
Amp Draw
Tail
20mA,
Back-Up
0.2A,
Stop
0.2A,
Amber Turn
0.1A,
Warning
0.4A
Dimensions
5.5” Diameter x 0.5” Depth
Mounting
3 Hole Flange
. Bolt circle diameter: 4.9”
Connector
9 Leads 18AWG Bl
unt Cut, 10.0”
IMPORTANT:
Before starting the installation, it is recommended that the light is held in its desired
mounting position temporarily to ensure that the desired location is suitable for placement. Ensure that
proper clearance for the wires and hardware is achieved and that the lights LEDs are unobstructed.
Wiring Designations:
Black
Ground (-)
Brown
Tail (+VDC)
Blue
Back-up (+VDC)
Red
Stop & Turn (+VDC)
White
Optional Amber Turn (+VDC)
Optional Warning ‘Mode 2’ (-GND)
Green
Flashing Warning (+VDC)
Yellow
Programming (+VDC)
~ 1 Second Next Flash Pattern
~ 3
– 5 Sec. Toggle Color (Single Color Pattern)
~ 7+ Sec. Reset to Pattern # 1
