27
EN
Technical Data
Article number:
01688
Model number:
WJ 528
Power supply:
220 – 240 V ~ 50 / 60 Hz, 1500 W
Capacity: 1.5
l
Protection class / rating: I / IPX4
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps that are listed, contact the
customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause
Fix
The device does not
work.
The mains plug is not insert-
ed correctly in the socket.
Correct the
fi
t of the mains
plug.
The socket is defective.
Try another socket.
No mains voltage is present.
Check the fuse of the mains
connection.
No steam is emerg-
ing.
The device is not switched on. Press the On / Off switch (
8
).
The device is not yet ready to
operate.
The device needs to heat up
for around 20 – 30 sec-
onds before the steam can
emerge. The heating control
lamp (
9
) goes out once the
device has reached operating
temperature.
The water tank (
4
) is empty.
Top up the water tank again
(see the “Filling the Water
Tank” chapter).
The device is furred up.
Descale the water tank (see
the “Cleaning, Care and Stor-
age” chapter).
The trigger (
D
) has not been
activated.
The trigger must be activat-
ed for steam to be able to
emerge from the device (see
the "Use" chapter).