EN
24
Attaching / Detaching the Combi-Attachment / Brushes / Crevice Attachment
1. To attach it,
fi
rst plug the adapter for attachments either di-
rectly onto the handle (
1
) or attach extension tubes before-
hand (see the “Attaching / Removing Extension Tubes”
section).
2. Plug the combi-attachment, the crevice attachment or one
of the brushes onto the adapter.
PLEASE NOTE:
When plugging on the combi-attach-
ment, make sure that the arrows on the adapter and the
attachment are pointing towards one another.
3. To detach, simply pull the combi-attachment, the crevice attachment or a brush off
the adapter.
4. Press the release button (
A
) and pull the adapter out of the handle or extension tube.
Attaching / Detaching the Micro
fi
bre Cloth
• For use with the micro
fi
bre cloth, remove the scraper lip
from the combi-attachment: To do this, pull the locking
catch (
B
) backwards,
fl
ip the scraper lip (
C
) down and un-
hook.
• Attaching: Pull the micro
fi
bre cloth over the combi-attach-
ment.
• Detaching: Pull the micro
fi
bre cloth off the combi-attach-
ment.
Filling the Water Tank
PLEASE NOTE!
■
Never pour any cleaning agent or additives into the water tank. This may destroy
the device and safe working is no longer guaranteed. Use distilled water or cold tap
water to
fi
ll it.
■
Do not over
fi
ll the water tank, pour in no more than 1.5 l.
We recommend that you pour cold distilled water into the water tank (
4
) in order
to prevent calci
fi
cation, particularly if the tap water is very hard.
1. Unscrew the water tank cap (
3
).
2. Use the measuring cup to pour cold, clean water into the water
tank (
max. 1.5 l
).
3. Screw on the water tank cap again so it is hand-tight.
B
C