Maxwell MW-3004 B, Инструкция по эксплуатации

Страница: 9 / 44

9
ENGLISH
9
STEAM IRON
DESCRIPTION
1. Water spray nozzle
2. Water tank lid
3. Steam supply regulator/SELF CLEAN mode
4. Spray button
5. Additional steam release button
6. Handle
7. Power cord protection
8. Base
9. Heating element on/off indication
10. Water tank with backlight
11. Temperature regulator
12. Maximal water level indication
13. Iron sole
SAFETY MEASURES
Before using the unit, read these instructions
carefully. Keep these instructions for future refer-
ence.
Use the unit according to its intended purpose
only, as it is stated in this user manual. Mishandling
the unit can lead to its breakage and cause harm
to the user or damage to his/her property.
• Before switching the unit on, make sure that
your home mains voltage corresponds to the
iron operating voltage.
• Power cord is equipped with “euro plug”; plug it
into the socket with reliable grounding contact.
• In order to avoid fire or electric shock do not
use adapters for plugging the unit in.
• In order to avoid mains overloading do not
switch on many electrical appliances with high
power consumption at the same time.
• Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemical agents etc.
• Do not let the power cord run on the ironing
board and touch hot surfaces.
• Place the iron on the base (vertically) while
working intervals.
• Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off.
• Always unplug the iron when you are not using it.
• To unplug the iron always pull its plug, but not
the power cord.
• To avoid risk of electric shock, do not immerse
the iron, power cord and plug into water or
other liquids.
• Before taking the iron away, pour out the
remaining water and let the unit cool down.
• In order to avoid electric shock do not dismantle
the iron by yourself. If the unit has damages
apply to the authorized service center.
• For children safety reasons do not leave
polyethylene bags, used as a packaging,
unattended.
• Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
• Never allow children to use the unit as a toy.
• Store the iron vertically in a dry cool place, out
of the reach of children and disabled persons.
• Do not touch the surface of the unit marked with
a symbol while ironing and after it. Danger
of burns!
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE
ONLY
BEFORE USAGE
• Take out the iron from the package and remove
the protective cartoon covering from the iron
sole (13).
• Make sure that the electrical supply voltage
corresponds to the iron's operating voltage.
Note:
The iron's heating element is broken in during
the first use; it is normal for a small amount of
smoke to be released.
CHOICE OF WATER
• To fill the water tank use regular tap water. If the
water is hard then it is recommended to mix it
with distilled water at a ratio of 1:1, if the water
is very hard, mix it with distilled water at a ratio
of 1:2 or use only distilled water.
Note:
Do not fill the water tank (10) with scented
liquids, vinegar, starch solutions, descaling
reagents, chemical substances etc.
FILLING THE WATER TANK
Make sure that the iron is disconnected from
electrical power before filling it with water.
• Set the steam release regulator (3) to the posi-
tion of steam vapor OFF.
• Open the water tank lid (2).
• Fill it with water. Close the lid (2).
Note:
• Do not fill it with water above MAX. indica-
tion.
MW-3004_correct.indd 9 16.08.2013 9:20:56