1.
RJ45, RJ11, RJ12, USB test connector
2.
Display
3.
„Test” button
4.
Function switching switch
5.
„10A” socket: 200mA - 10A
6.
”mA” socket: til 200mA
7.
USB test socket (removable)
8.
Cable test LED lighting
9.
”Hold” button
10.
”Light” (background lighting) button
11.
”V-Ω” socket
12.
”COM” (common) socket
13.
Cable testing LED line
14.
Test socket RJ45, RJ11, RJ12 (removable)
V—
…
measuring
•
Connect the black measurning wire to the „
COM
” socket and the red one to
the „
V/Ω
” socket.
•
Set the function switch to the proper „
V—
…
setting and connect the wires to the circuit.
Note:
• If you are unsure about the measured voltage range, set the function
switch to a higher range.
• If the LCD shows „1” , it means a really high value, and the range should
be set to a higher value.
V~ measuring
•
Connect the black measurning wire to the „
COM
” socket and the red one to
the „
V/Ω
” socket.
•
Set the function switch to the proper "
V~
"
measuring setting and connect the wires to the circuit.
Note:
• If you are unsure about the measured voltage range, set the function
switch to a higher range.
• If the LCD shows „1” , it means a really high value, and the range should
be set to a higher value.
A—
…
measuring
•
Connect the black measurning wire to the „
COM
” socket and the red one to
the „
mA
” socket (max. 200 mA) or connect the red one to the „
10 A
” socket
(max. 10 A).
•
Set the function switch to the proper „
A—
…
setting and connect the wires to the circuit.
