maxwatt MX4500iS, Руководство оператора

Страница: 31 / 52

28
Before starting the generator:
1. Verify that the generator is outside on a dry, level surface. Allow at least two feet of clearance on all sides of
the generator.
2. To maximize safety, check that the generator is properly grounded (see “GROUND THE GENERATOR”).
3. Check there is sufficient level of oil in the crankcase. Add oil if necessary (see “ADD/CHECK OIL”).
4. Make sure there is sufficient level of petrol in the fuel tank. Add fuel if necessary (see “ADD/CHECK FUEL”).
5. Make sure all electrical devices are unplugged from the generator during ignition. Otherwise it will be
difficult for the engine to start.
To start the generator, perform the following steps:
Turn the LOW IDLE MODE switch (Fig. 12) to “OFF”.
1. Turn the FUEL switch (Fig. 13) to the “ON” position.
Manual Start:
3-1. Turn the ENGINE switch to
the “ON” position (Fig. 15).
3-2. Place one hand on the
generator to hold it in place,
and pull on the recoil starter
handle slowly until a slight
resistance is felt (Fig. 15). Then
pull quickly to start the engine.
Return cord gently into the
machine. Never allow the cord
to snap back.
Fig. 12
Fig. 13
Fig. 15