MaxVision terapac Скачать руководство пользователя страница 3

 

TeraPac User Operation and Maintenance Guide 

 

iii 

Proprietary Rights-Contracts with Certain U.S. Government Agencies.

 If the Software is acquired under the terms of 

a Department of Defense or civilian agency contract, the Software is "commercial item" as that term is defined at 48 
C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software 
documentation" as such terms are used in 48 C.F.R. 12.212 of the Federal Acquisition Regulations and its successors 
and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995) of the DoD FAR Supplement and its successors. All U.S. 
Government end users acquire the Software with only those rights set forth in this Agreement.  

Export Restrictions.

 You acknowledge that the laws and regulations of the United States restrict the export and re-export 

of certain commodities and technical data of United States origin, including the Product and the Software, in any medium. 
You agree that you will not knowingly, without prior authorization if required, export or re-export the Software or the 
Product in any medium without the appropriate United States and foreign government licenses.  

Severability.

 You acknowledge and agree that each provision of this Agreement that provides for a disclaimer of 

warranties or an exclusion or limitation of damages represents an express allocation of risk, and is part of the 
consideration of this Agreement. Invalidity of any provision of this Agreement shall not affect the validity of the remaining 
provisions of this Agreement.  

General.

 This Agreement is the entire agreement between you and MaxVision   relative to the Product and the Software, 

and supersedes all prior written statements, proposals or agreements relative to its subject matter. It may be modified only 
by a writing executed by an authorized representative of MaxVision. No MaxVision reseller or sales representative is 
authorized to make any modifications, extensions or additions to this Agreement. This Agreement is governed by the laws 
of the State of Alabama without application of the principles of conflicts or choice of laws. The application of the United 
Nations Convention on Contracts for the International Sale of Goods to this Agreement is expressly excluded.  

Copyright 

The materials in this document are the copyrighted works of MaxVision Corporation, copyright © 2004. All rights reserved. 
Email 

[email protected]

 for permission to duplicate and otherwise re-use. 

Trademarks 

MaxVision, and MaxPac are registered trademarks, and MaxPro and TeraPac are trademarks, of MaxVision Corporation. 
Microsoft and Windows are registered trademarks of Microsoft Corporation. Intel and Pentium are registered trademarks 
and Xeon is a registered trademark of Intel Corporation. Other trademarks and registered trademarks are the property of 
their respective owners. 

Regulatory Approvals 

EN60950, EN55024, EN55022, FCC, Part 15, EN61000-3-2 & EN61000-3-3.  

Warnings 

Changes or modifications to this device that are not approved by the party responsible for compliance could void the 
user’s authority to operate the equipment. 

To reduce the risk of electrical shock, do not attempt to open the device unless instructed to do so. Do not use any tool for 
purposes other than instructed. 

A Lithium Ion battery is included with the system motherboard. This battery is used for the Real Time Clock (RTC) circuit. 
The expected lifetime of the battery is approximately 5 years. There is a danger of explosion if this battery is incorrectly 
replaced. Replace only with the same or equivalent type recommended by the motherboard manufacturer. Dispose of 
used batteries according to the manufacturer’s instructions. 

 

Содержание terapac






























































Отзывы: