manualshive.com logo in svg

MaxVision terapac, Руководство пользователя по эксплуатации и техническому обслуживанию

Поделиться
Скачать
MaxVision terapac Скачать руководство пользователя страница 14

10 

TeraPac User Operation and Maintenance Guide 

 

 

Before You Start 

The instructions in this chapter assume that you have just taken delivery of a new MaxPac/TeraPac 
combo and that you are about to power them up for the very first time. 

1)  Unpack your MaxPac X-Class system and connect its cables (power, mouse, keyboard, and 

network) as described in the 

MaxPac X-Class User Operation and Maintenance Guide

. 

Note:

 Do NOT power-up your MaxPac until you have connected it to the TeraPac as discussed 

later in this Chapter. Also, in the case of dual- or triple-display systems, do not unfold the 
display screens at this time (wait until after you have connected the TeraPac to the MaxPac). 

2)  Unpack your TeraPac unit and connect it to the MaxPac as described in Chapter 2 of this 

manual. 

3)  In the case of dual- or triple-display MaxPac systems, unfold the display screens at this time. 

Powering-up Your MaxPac/TeraPac Combo 

The following instructions assume that the system has been configured such that one channel of 
the MegaRAID card is controlling an internal SCSI disk (the main system disk) on one of its 
channels and the external TeraPac RAID array on its other channel.  

1)  Power-up the MaxPac as discussed in the 

MaxPac X-Class User Operation and Maintenance 

Guide

. Observe that the BIOS boot sequence should reflect the fact that two logical drives have 

been found on the host adapter as shown in Figure 3-1 (the main point here is that you 
shouldn’t see any error messages). 

 

Figure 3-1 

Note:

 The TeraPac doesn’t have an On/Off power switch, because its power-up state is 

automatically controlled by the MegaRAID controller via the TeraPac’s data/control cable. 

2)  Power the system all the way up into Windows®, enter your Windows license information, and 

register your operating system as discussed in the 

MaxPac X-Class User Operation and 

Maintenance Guide

. 

3)  Right-click on the 

My Computer

 icon on your desktop, and then select (left-click) the 

Manage

 

item from the ensuing pop-up menu. 

4)  Click the ‘+’ symbol next to the 

Storage

 item (if this item is in its collapsed state) in the left-

hand navigation pane, and then select the 

Disk Management

 item. You should see two disk 

drives similar to those shown in Figure 3-2. 

Содержание terapac






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды