manualshive.com logo in svg

MaxVision terapac, Руководство пользователя по эксплуатации и техническому обслуживанию

Поделиться
Скачать
MaxVision terapac Скачать руководство пользователя страница 18

14 

TeraPac User Operation and Maintenance Guide 

 

 

Before You Start 

The instructions in this chapter assume that you have just taken delivery of a new TeraPac RAID 
array that you wish to use with an existing MaxPac X-Class system.  In this case, there are many 
different configuration possibilities; for example: 

a)  Your MaxPac may have an IDE hard drive as its main system disk. 

 

In this case, your TeraPac will be shipped to you with an associated MegaRAID SCSI control 
card. You should first insert this PCI card into your MaxPac as discussed in the 

MaxPac X-

Class User Operation and Maintenance Guide

. 

b)  Your MaxPac may have a SCSI hard drive as its main system disk, where this disk has its own 

dedicated SCSI card. 

 

In this case, your TeraPac will be shipped to you with an associated MegaRAID SCSI control 
card. You should first insert this PCI card into your MaxPac as discussed in the 

MaxPac X-

Class User Operation and Maintenance Guide

. 

Note:

 Theoretically, you could remove the existing SCSI card from the MaxPac system and use 

one of the channels from the MegaRAID card to control the internal system disk. However, this is 
NOT recommended (this option should only be exercised in the case of an overwhelming need to 
do s0, such as a lack of available PCI slots). 

c)  Your MaxPac may have a SCSI hard drive as its main system disk, and this disk may be driven 

by one channel of a MegaRAID SCSI control card, in which case the other channel is free to be 
used to control the external TeraPac RAID array. 

The discussions and images in the rest of this chapter assume that your system is configured as 
described in option c). This means that the operating system disk is visible on one of the channels, 
which would not be the case with regards to options a) and b). 

1)  Unpack your MaxPac X-Class system. If this system does not already contain a MegaRAID 

card, then insert this card – which will be shipped with your TeraPac – into your MaxPac as 
discussed in the 

MaxPac X-Class User Operation and Maintenance Guide

. Then connect the 

MaxPac’s cables (power, mouse, keyboard, and network) as described in the 

MaxPac X-Class 

User Operation and Maintenance Guide

. 

Note:

 Do NOT power-up your MaxPac until you have connected it to the TeraPac as discussed 

later in this Chapter. Also, in the case of dual- or triple-display systems, do not unfold the 
display screens at this time (wait until after you have connected the TeraPac to the MaxPac). 

2)  Unpack your TeraPac unit and connect it to the MaxPac as described in Chapter 2 of this 

manual. 

3)  In the case of dual- or triple-display MaxPac systems, unfold the display screens at this time. 

Powering-up Your MaxPac/TeraPac Combo 

1)  Power-up the MaxPac (we are going to perform a quick “sanity check” to prove that the MaxPac 

does not yet see the TeraPac’s RAID array). 

Note:

 The TeraPac doesn’t have an On/Off power switch, because its power-up state is 

automatically controlled by the MegaRAID controller via the TeraPac’s data/control cable. 

Содержание terapac






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды