Maxview MXL051, Инструкция по установке и эксплуатации

Страница: 6 / 36

Positioning your Roam x
Distance between Router and Antenna
For best performance, we recommend mounting the
router in close proximity to the roof mounted
antenna. For best performance, only use the antennas
standard 0.8m coaxial cables.
This means, once you have a suitable location for the
router inside the vehicle, you must also ensure there
is a suitable space on the roof to position the antenna
in close proximity to the router. For example, if you
would like to position your router in an overhead
cupboard, we recommend mounting the antenna
directly above the cupboard space.
Roof Antenna Position
We recommend leaving 30cm gap from obstacles
around the antenna to avoid interference issues
and mounting on a horizontal flat roof.*
Router Wi-Fi Antenna Space (Ref page 10)
The internal router can be mounted in a horizontal or
vertical orientation. However, bear in mind that the
Wi-Fi antenna must be vertical for maximum
performance. You must leave enough space for this.
Power Supply
The router comes with 12V cigarette adaptor.
You should ensure your router power supply can
reach your preferred power source.
1.
The 3M seal provides a permanent installation.
The adhesive is extremely strong and the antenna is
not designed to be removed. Please ensure you are
completely happy with your antenna’s position and
orientation before installation.
2.
The Roam X antenna is designed to be mounted
directly to a horizontal, flat and smooth surface such
as GRP (Glass Reinforced Plastic) with the coaxial
cables passing directly through the roof underneath
the centre of the antenna. The standard installation is
designed for roof thicknesses from 10mm up to 50mm.
If this does not suit your installation, please see our
mounting accessories (page 4) for a more suitable
mounting option.
6
Important Antenna Installation Information
10 - 50mm
*Sloped Roof
(Pop Top/Campers)
Although we always recommend a flat
installation to maximise Antenna performance.
In some installations you may find that you
need to install your Roam X on an incline.
This is useful for an Elevated Roof (Pop Top)
installation where you may use your Roam X
with both the Roof flat and at an incline.
We highly recommend that when installing the
Antenna on any incline you test the Roam X
before installation in a horizontal position and
again in the incline position to satisfy yourself of
the performance.