Maxum 2900 SE Sport Express Cruiser, Руководство пользователя

Страница: 43 / 60

Chapter 2: Components/Systems
37
Connecting To Shore Power
1. Turn Off all breakers and switches on the AC master panel.
2. Attach the shore power cord(s) to the boat inlet(s) first then to the dockside outlet(s).
3. Monitor the AC panel’s polarity indicator lights, located below the line master breaker(s), as follows:
•
A green light illuminating after the power cord is plugged into the dockside outlet indicates acceptable electrical
power. You may turn On the master breaker switch.
•
A red light, however, indicates reversed polarity, which could cause electrical system damage and possibly electri-
cal shock injuries. In this case, do not turn On the master breaker switch (see warning on page 28).
4. Switch the "Line 1 Dockside Master" On.
5. If equipped with duel shore power, switch the "Line 2 Dockside Master" On (dual dockside only).
6. Turn On the individual component breakers as required.
SHORE POWER INLET(S) (2ND INLET IF
EQUIPPED WITH DUAL SHORE POWER)
AC PANEL - SINGLE SHORE POWER
BATTERY CHARGER - 15 AMPS
RECEPTACLES - 15 AMPS
WATER HEATER - 15 AMPS
MICROWAVE - 20 AMPS
ACCESSORY - 20 AMPS
AC VOLTMETER
DOCKSIDE MASTER
POLARITY LIGHT
AC PANEL - DUAL SHORE POWER
BATTERY CHARGER - 15 AMPS
RECEPTACLES - 15 AMPS
WATER HEATER - 15 AMPS
RANGE - 20 AMPS
REFRIGERATOR - 15 AMPS
SPARE - 20 AMPS
AIR CONDITIONER - 25 AMPS
AC VOLTMETER
LINE 2 DOCKSIDE MASTER
REFRIGERATOR - 5 AMPS
RANGE - 20 AMPS
AIR/HEAT - 25 AMPS
LINE 2 POLARITY LIGHT
LINE 1 DOCKSIDE MASTER
LINE 1 POLARITY LIGHT
VOLTMETER SELECTOR SWITCH
SPARE - 20 AMPS