MaxTronic SS-4503E, Руководство пользователя по оборудованию

Страница: 14 / 31

Hardware Installation
7
Chapter 2: Hardware Installation
This section describes the process in installing different types of hard disk drives, and mounting the RAID system.
2.1 Installing the Hard Disks
Both SS-4503E and SS-4503R RAID systems support SAS or SATA interface hard drives.
2.1.1 SAS hard disks
Follow the procedures below to install SAS hard drives:
1. Insert the SAS hard drive into the hard disk tray. Screw the sides to secure the hard disk. Repeat this procedure to
install more hard disks.
2. Insert the key to the key slot and turn to unlock the front panel door.
3. Pull open the front panel door.
Caution
It is recommended to mount the RAID system to the rack cabinet first before installing the hard
drives and the drive trays. If the hard drives are installed first, the RAID system may be too heavy
to lift or handle. And the possible impact during installation may damage the drives. See
2.2
Mounting the RAID system on page 2-12
for more information.
220
220