Basic Principles of Operation
5-9
Maxtor D740X-6L 20.0/40.0/60.0/80.0GB AT
• PLL
• Serial Interface
• TA Detection and Correction
(''
&5
The pre-compensator introduces pre-compensation to the write data received from
the sequencer module in the DCIIA. The pre-compensated data is then passed to the
R/W Pre-Amplifier and written to the disk. Pre-compensation reduces the write
interference from adjacent write bit.
('''
8$953894
Digital and analog controlled AGC function with input attenuator for extended range.
(''
:/
Continuous time data filter which can be programmed for each zone rate.
(''%
/63/564/
Digitally controlled and programmable filter for partial response signal conditioning.
(''(
/!"
Provides very high speed digitization of the processed read signal.
('')
8$!
Decodes ADC result into binary bit stream.
(''*
.!
Provides 50/52 code conversion to NRZ. Includes preamble and sync mark
generation and detection.
(''
"
Servo processor with servo data recovery and burst demodulation.
(''+
21;
Provides programmable frequencies for each zone data rate.
(''< ==
Provides digital read clock recovery.
(''
High speed interface for digital control of all internal blocks.
(''' #!
Detects thermal asperities’ defective sectors and enables thermal asperity recoveries.
Содержание D740X-6L 20.0 AT
