Maxtor D740X-6L 20.0 AT Скачать руководство пользователя страница 4

Страница: 4 / 99

Thank you for your interest in Maxtor hard disk drives. This manual provides technical information for

OEM engineers and systems integrators regarding the installation and use of Maxtor hard drives. Drive

repair should be performed only at an authorized repair center. For repair information, contact the Maxtor

Customer Service Center at 800-2MAXTOR or 408-922-2085.

CAUTION: Maxtor hard drives a

re precision products. Failure to follow these precautions and guidelines out-

lined here may lead to product failure, damage and invali

dation of all warranties.

BEFORE

unpacking or handling a drive, take all proper electro-static discharge (ESD) precau-

tions, including personnel and equipment grounding. Stand-alone drives are sensitive to ESD

damage.

BEFORE removing drives from their packing material, allow them to reach room temperature.

During handling, NEVER drop, jar, or bump a drive.

Once a drive is removed from the Maxtor shipping container, IMMEDIATELY secure the

drive through its mounting holes within a chassis. Otherwise, store the drive on a padded,

grounded, antistatic surface.

NEVER switch DC power onto the drive by plugging an electrically live DC source cable into

the drive's connector. NEVER connect a live bus to the drive's interface connector.

ELECTRICAL GROUNDING - For proper operation, the drive must be securely fastened to

a device bay that provides a suitable electrical ground to the drive baseplate.

Please do not remove or cover up Maxtor factory-installed drive labels. They contain information required

should the drive ever need repair.

Содержание D740X-6L 20.0 AT




































































































Результаты поиска

Содержание D740X-6L 20.0 AT

Отзывы:

Похожие инструкции для D740X-6L 20.0 AT

Бренды по названию

Популярные бренды

Maxtor D740X-6L 20.0 AT, Руководство по эксплуатации продукта

Результаты поиска

Содержание D740X-6L 20.0 AT

Отзывы:

Похожие инструкции для D740X-6L 20.0 AT

Бренды по названию

Популярные бренды