10
&Zn=x
n=0-3 Store telephone number x into non-volatile
RAM
%E_
%E0
V.22bis auto-retrain disabled
%E1
V.22bis auto-retrain enabled
%G_
%G0 Enable Auto Fall Forward/Back
%G1
Disable Auto Fall Forward/Back
3.5
MNP/V.42/V.42bis Commands
%An
n=0-
Set auto-reliable fallback character to n (where
127
n = 0 to 127,ASCII). Requires the \C2 setting
%C_
%C0
Disable MNP Class 5 data compression
%C1 Enable MNP Class 5 data compression
\A_
\A0
64-character maximum MNP block size
\A1
128-character maximum MNP block size
\A2
192-character maximum MNP block size
\A3
256-character maximum MNP block size
\Bn
n=1-9 Send a 1/10 second line break to the modem,
where n = 1 to 9. At normal connect, the
default is 3
\C_
\C0
Do not buffer data during LAPM/MNP
handshaking
\C1
Buffer all data for 4 seconds, until receiving
200 characters or until a packet is detected
\C2
Do not buffer data; switch to normal mode
when fallback character is detected
\G_
\G0
Disable DCE flow control
\G1
Enable DCE flow control
\J_
J0
Disable serial port data rate adjustment
(keep high data rate between DTE and
modem, regardless of modem-to-modem
data rate)
J1
Enable serial port data rate adjustment so
serial data rate automatically adjusts to match
the modem-to-modem data rate
\Kn
n=0-5 Set break control, where n= 0 to 5. Default
is 5
\N_
\N0
Normal data-link only
\N1
Direct data-link only
\N2
MNP data link only
\N3
V.42/MNP/Normal data link
