Maxtec SHOCKBLAZE, Инструкция по эксплуатации, Страница: 22 / 42

60
Use and instructions book
pedal. To remove it, turn your heel sideway.
All the screws have to be well tightened, if one plate only is
loosen, it is almost impossible to get down from your bicy-
cle.
Into the producer manual you will find all the instructions for
the pedals adjustment.
WARNING/IMPORTANT:
Always check if the pedals are well and correctly fastened.
Follow carefully the instructions to avoid to damage the
pedals and the crank thread and check the wear limit of
the shoe plates.
AFTER USING YOUR SHOCKBLAZE BICYCLE
A correct and periodical cleaning of your bicycle guarantee
you an excellent functioning.
After riding you have to protect your bicycle from sun, rain
and snow; the atmospheric agents could corrode the metal
parts while the sun could fade the paint and damage the
plastic/rubber parts.
If your bicycle will be unused for a long period, it is better
to clean and lubricate if before.
You can protect the frame using a suitable polishing pro-
duct.
Keep your bicycle lifted from the ground with the tyres half
blown up.
It is important to place the bicycle far from electrical motors
as the ozone wears rubber and paint out.
LIBRETTO_Layout 1 25/10/10 18:44 Pagina 60