XCite™ OEM RF Module – Product Manual v1.1
Appendix B:
Additional Information
XCite OEM RF Module Specifications
Table 8.
XCite OEM RF Module Specifications
Specification
9XCite (900 MHz) OEM RF Module
Performance
Indoor/Urban Range
up to 300’ (90 m)
Outdoor LOS Range
up to 1000’ (300 m) w/ 2.1 dB dipole antenna
Transmit Power Output
4 mW (6 dBm)
Serial Data Rate
9600 bps
38400 bps
RF Data Rate (Baud)
10000 bps
41666 bps
Receiver Sensitivity
-108 dBm
-104 dBm
Interfacing, Networking & Security
Frequency 902-928
MHz
Spread Spectrum Type
Frequency Hopping, Direct FM modulator
Single Channel (Optional)
Fixed or User Selectable (up to 12 channels)
Network Topology
Peer-to-Peer, Point-to-Multipoint, Point-to-Point, Multi-Drop Transparent
Channel Capacity
Hopping Mode (7 hop sequences share 25 frequencies) or
Single Channel Mode (25 single frequency channels)
Serial Data Interface
CMOS
I/O Data Rate
Software selectable 1200-57600 bps
Power Requirements
Supply Voltage
2.85 to 5.50 VDC
Transmit Current (@ 2.85V)
55 mA
Receive Current (@ 2.85V)
45 mA
Receive Current (@ 5V)
55 mA
Power Down Current
20 µA
Physical Properties
Module Board Size
1.6” x 2.825” x 0.35” (4.06 cm x 7.17 cm x 0.89 cm)
Weight
0.8 oz. (24 g)
Connector
11-Pin & 4-Pin 0.1” spaced Male Berg-type headers
Operating Temperature
Commercial (0 to 70º C) or Industrial (-40 to 85º C)
Antennas
Type
¼ Wave Monopole, 3” (7.62 cm) integrated wire, 1.9 dBi
Connector (Optional)
Reverse-polarity SMA (RPSMA)
Impedance
50 ohms unbalanced
Certifications
or call 1-801-765-9885)
FCC Part 15.247
OUR-9XCITE
Industry Canada (IC)
4214A-9XCITE
© 2004 MaxStream, Inc., Confidential and Proprietary
19
