XCite™ OEM RF Module – Product Manual v1.1
9XCite
(900 MHz)
Approved Antennas
ANTENNA WARNING
WARNING This device has been tested with Reverse Polarity SMA connectors with the antennas listed in the table below.
When integrated into the OEM product, these fixed antennas require installation preventing end-users from
replacing them with non-approved antennas. Any antenna not already tested with the XCite module must be
tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions.
Table 7.
Antennas approved for use with the 9XCite (900 MHz) OEM RF Module
Part Number
Type
Gain
Application
* Yagi
6.2dBi
Fixed/Mobile
**
* Yagi
7.2dBi
Fixed/Mobile
**
A09-Y8 Yagi 8.2dBi
Fixed/Mobile
**
Yagi
9.2dBi
Fixed/Mobile
**
Yagi
10.2dBi
Fixed/Mobile
**
A09-Y11 Yagi 11.2dBi
Fixed/Mobile
**
Yagi
12.2dBi
Fixed/Mobile
**
Yagi
13.2dBi
Fixed/Mobile
**
Yagi
14.2dBi
Fixed/Mobile
**
A09-Y15 Yagi 15.2dBi
Fixed/Mobile
**
A09-F2
Omni Direct
2.2dBi
Fixed **
A09-F5
Omni Direct
5.2dBi
Fixed **
A09-F8
Omni Direct
8.2dBi
Fixed **
*
Omni Direct
9.2dBi
Fixed **
*
Omni Direct
7.2dBi
Fixed **
A09-M7
Omni Direct
7.2dBi
Fixed **
A09-H
1/2 wave antenna
2.1dBi
Fixed/Mobile **
A09-HBMM-P5I
1/2 wave antenna
2.1dBi
Fixed/Mobile **
A09-QBMM-P5I
1/4 wave antenna
1.9 dBi
Fixed/Mobile **
*
1/4 wave integrated wire
antenna
1.9 dBi
Fixed/Mobile **
* FCC-approved antennas not inventoried by MaxStream – Contact MaxStream for more information.
** Can be approved for portable applications if integrator gains approval through SAR testing
Over 100 additional antennas that have been tested and are approved for use with MaxStream
900 MHz Radio Modems (including “Mag Mount”, “Dome”, “Multi-path” and “Panel” antennas).
Because of the large number of approved antennas, MaxStream requests that you send specific
information about an antenna you would like to use with the modem and MaxStream will
evaluate whether the antenna is covered under our FCC filing.
Contact MaxStream (801) 765-9885 for more information.
RF EXPOSURE
WARNING Portable Antenna Applications: The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter for satisfying RF exposure compliance.
The preceding statement must be included as a CAUTION statement in manuals for OEM products to alert
users on FCC RF Exposure compliance.
© 2004 MaxStream, Inc., Confidential and Proprietary
18
