MaxPro MPRS480V, Руководство пользователя

Страница: 4 / 74

R Random Orbit Sander MPRS480V User Manual
4
Carrying power tools with your finger on the switch or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool
will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR SANDER
GENERAL
ͻdŚŝƐƚŽŽůƐŚŽƵůĚŶŽƚďĞƵƐĞĚďLJƉĞŽƉ le under the age of 16 years
ͻdŚŝƐƚŽŽůŝƐŶŽƚƐƵŝƚĂďůĞĨŽƌǁĞƚƐĂŶĚŝŶŐ
ͻEĞǀĞƌƵƐĞƚŚĞƚŽŽůǁŚĞŶĐŽƌĚŝƐĚĂŵĂŐĞĚ͖ŚĂǀĞŝƚ replaced by a qualified person
ͻ Do not work materials containing asbestos (asbestos is considered carcinogenic)
ͻůǁĂLJƐĚŝƐĐŽŶŶĞĐƚ plug from power source before making any adjustment or changing any accessory
ACCESSORIES
ͻ MAXPRO can assure flawless functioning of the tool only when original accessories are used
ͻŽŶŽƚĐŽŶƚŝŶƵĞƚŽƵƐĞǁŽƌŶ͕ƚŽƌŶŽƌŚĞĂǀŝůLJĐůŽŐŐĞĚ sanding discs
BEFORE USE
ͻůǁĂLJƐĐŚĞĐŬƚŚĂƚƚŚĞƐƵƉƉůLJǀŽůƚĂŐĞŝƐƚŚĞƐĂŵĞĂƐƚŚĞ voltage indicated on the nameplate of the tool
(tools with a rating of 230V or 240V can also be connected to a 220V supply)
ͻǀŽŝĚĚĂŵĂŐĞƚŚĂƚĐĂŶďĞĐĂƵƐĞĚďLJƐĐƌĞǁƐ͕ŶĂŝůƐĂŶĚ other elements in your workpiece; remove them
before you start working
ͻhƐĞĐŽŵƉůĞƚĞůLJƵŶƌŽůůĞĚĂŶĚƐĂĨĞĞdžƚĞŶƐŝŽŶĐŽƌĚƐǁŝƚŚĂ capacity of 16 Amps (U.K. 13 Amps)
GB