MaxPro MPBDP16, Руководство пользователя

Страница: 12 / 112

D Drill Press MPBDP16 User Manual
12
CLEANING AND MAINTENANCE
The drill is maintenance-free to a large extent. Keep the equipment clean. Pull the power plug before doing
any cleaning and maintenance work on the appliance. Do not use any harsh, abrasive solvents to clean.
Ensure that no liquid seeps into the equipment. Regrease all bare parts when the work is finished. The drill
pillar, blank parts of the column, and the drill table especially should be regreased at regular intervals. Use
a standard, acid-free lubricating grease to do this.
Important: Do not use your household trash can as a receptacle for oil and grease-soaked cleaning rags or
grease and oil sludge. Dispose of these toxic materials in an environmentally friendly fashion. Regularly
check and clean the ventilation holes. Store the equipment in a dry room. Should the equipment become
damaged, do not try to repair it yourself. Leave this work to the hands of a qualified electrical technician.
We recommend that you clean the equipment immediately after you use it.
Clean the appliance regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents;
these may be aggressive to the plastic parts in the appliance. Ensure that no water can get into the interior
of the equipment.
Storage
Store the equipment and accessories out of children’s reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool in its original
packaging.
ENVIRONMENT
ͻ Do not dispose of electric tools, accessories and packaging together with household waste material
- in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compatible recycling facility
Fault Symptom Possible Cause Troubleshooting
1
Electric motor out of
service
Disconnection between plug and
power socket
Put plug in power socket
shortcircuit in power supply Repair and reconnection
At switch-off Switch on
Loose switching contact Replace switchboard by repairer
Burnout of stator coil Replace stator by repairer
Stator wiring disconnection Reconnection by repairer
tripout due to improper closing of
movable guard
Shut down movable guard again
Electric circuit disconnection Check electric circuit connection by repairer
2
Sluggish start-up of
electric motor, falling
short of running
speed
Unsmooth running in mechanical
part
Check mechanical part by repairer
Burnout of switching contacts Repair or replace switchboard by repairer
Capacitor damage Replace capacitor by repairer
Low supply voltage Regulate supply voltage
3
Excessive running
noise
Electric motor at fault Check motor by repairer
Stopover in mechanical running gear
or damage in bearing
Check mechanical part by repairer
Severe wear in bearing or edge Replace bearing, stator or rotor
TROUBLE SHOOTING
GB