MaxPro PROFESSIONAL 113-0000, Руководство пользователя

Страница: 5 / 68

4 GB
f) Keep cu tting tools sharp and clean. Properly maintained cu tting tools with sharp cu tting ed g es are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits et c. in accordance with these ins tructions, t aking into
account the w orking co ndition s and the work to be performed. Use of the power tool for opera tion s
di ff erent from those intended could result in a hazardous situa tion.
5) Service
a) Have your power tool ser viced by a qualified repair per son using only identi cal replaceme n t parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR BENCH GRINDER
Symbols
Observe the dimensions of the saw blade. The hole diameter must match the tool
spindle without play.
Dan g er Area! Keep hands far away from the cu tting a r ea while the machine is running.
Keep bystanders away.
Wear safety g o ggles.
• Store the machine in a safe manner when not being used. The stora g e loca tion must be dry and lockable.
This prevents the machine from stora g e dama ge, and f r om being ope rated by untrained persons.
• Never use the machine with a dama g ed cable. Do not touch the dama g ed cable and pull the mains plug
when the cable is dama g ed while w orking. Damag ed cables increase the risk of an electric shock.
• Check the cable r egularly and have a dama g ed cable repaired only thr ough an authorised customer
service a g ent for Bosch power tools. Replace dama g ed extension cables. This will ensure that the safety of
the power tool is maintained.
• Keep handles dry , c lean, and free from oil and g rease.Greasy , oily handles are slippery causin g loss of
control.
• Connect the machine to a mains supply with proper earthing c onnection. Socket outlet and extension
cable must be equipped with an opera ti ve prot ecti ve conductor.
• Do not use accessories which are not specifi cally designed and recommended by the tool manufacturer.
Just because the accessory can be a tt ached to your power t ool, it does not assu re safe opera tion.
• The rated speed of the accessory must be at least equal to the maximum speed marked on the power
t ool. Accessories running faster than their rated speed can br eak and fly apart.
• Do not use a dama g ed accessory. Before each use, check the grinding wheel for chips and cracks. If the
machine or applica tion tool is dropped , inspect for dama g e or install an undama g ed applica tion tool. A ft er
inspecting and inst alling the applica tion t ool, position yourself and bystanders away from the plane of the
rota ting applica tion tool and run the power tool at maximum no-load speed for one minute. Dama g ed
applica tion tools will normally br eak apart during this tes t time.
• Use the machine only with the spark gua rd. Sparks being expelled can injure your eyes or set objects in
the vicinity on fi re.
• When grinding, tilt d o wn the spark gua rd as f ar as possible. Sparking occu r s when grinding m etal.
• R egularly check the clearance between the workpiece supports as well as the holder of the spark gua rd
to the grinding wheel, and readjust as required. The clearance to the grinding wheel may not exceed 2 mm.
When the clearance is lar g er , you are not su fficie ntly protected a g ainst s parking. The workpiece can be
drawn in by the rota tional motion of the grinding wheel and lead to injuries.