Mechanical Mounting
1)
Determine the mounting location of your
MCB-30.
2)
Use the CB cabinet mounting bracket as a
template for marking the location of the screw
holes when mounting the CB under the dash,
or at another selected location.
3)
Drill the necessary holes and secure the
mounting bracket with the self-tapping
screws provided.
CAUTION: EXTREME CARE SHOULD BE
EXERCISED WHEN DRILLING UP INTO
THE DASH to avoid any damage to in-dash
electronic ignition wiring, cruise control,
instruments or accessory wiring.
4)
Position the CB unit between the mounting
bracket arms (in line with the retention knobs).
Set the CB unit angle for the best operating
comfort and control accessibility. Tighten the
two retention knobs to secure the CB unit in
place.
5)
Install the microphone hanger bracket utilizing
the pre-drilled mounting holes in the MCB-30
cabinet, or attach the bracket to the vehicle
dash or another convenient location.
6)
If you choose to mount the CB in a location
where self-tapping screws cannot be used,
determine the most secure method of fastening
the CB cabinet.
6
