10
1)
Turn the off/on-volume control clockwise and
adjust to a comfortable volume level.
2)
Select the desired CB channel by pressing the
!"
button to scroll up or the
#
button to scroll
down.
3)
Adjust the squelch control knob to reduce any
undesirable background noise when no signal
is being received. To do this, select a channel
where no signals are present, or wait until
signals cease on your channel. Then, rotate
the squelch control knob clockwise to a point
where the background noise ceases.
NOTE:
When the squelch is set properly, the
speaker will remain quiet until a signal is received.
In order to receive weak signals, do not set the
squelch too high.
To Transmit:
Press and hold the push-to-talk bar.
Speak slowly and clearly in a normal voice, two
to three inches from the microphone. When trans-
mitting, the TX LED will glow red.
To Receive:
Release the push-to-talk bar.
External Speaker Operation
To connect an optional external speaker, locate
the external speaker jack on the rear of the unit
and insert the speaker plug into the jack. The
radio's internal speaker will be silenced when
an external speaker is engaged.
