INSTALLATION INSTRUCTIONS
Your new MCB-100 WXD is designed to be installed
in-dash, under/over the dash or anywhere INSIDE your
vehicle. Safety and convenience should be your primary
considerations in deciding exactly where to locate
your CB radio.
CAUTION: Be sure the unit is located where it will
not interfere with the driver or impair access to any
controls necessary for the safe driving of the vehicle.
Before permanently installing the CB radio, connect
the wiring temporarily and make sure it is connected
properly and the CB unit is functioning. (Wiring instruc-
tions for power and antenna are located in this manual).
The radio's power and antenna connecting cables must
be routed and secured in such a manner as not to
interfere with the operation of the brake, accelerator
or other controls. Interference from either the CB unit
or its connecting cables may contribute to the loss of
control of the vehicle.
Hardware is provided for in-dash or under/over dash
installations. Use only the parts included with the CB
unit to ensure proper installation. The use of unautho-
rized parts can cause malfunctions.
In-Dash Installation
In-dash installation requires the following provided
hardware: mounting collar, front faceplate trim ring,
rear metal mounting strap, and microphone hanger
bracket.
4
