6
2. Connect power plug, external speaker, and mobile
antenna cable and slide the CB unit into the mounting
collar. The side tabs will expand and lock the CB
unit into place. Secure rear support with provided
metal mounting strap (fig. 4) or use a rear support
bushing (not included).
fig. 4
3. Install the front faceplate trim ring around the face
of the CB unit. Insert the faceplate trim ring tabs into
the grooves on the bottom of the CB unit. Then slide
the top side of the faceplate trim ring back into
position and snap tabs securely into grooves.
4. Mount the microphone hanger bracket wherever it is
most convenient.
Removing the In-Dash CB Unit
1. Remove the front faceplate trim ring by lifting the
tabs on the top of the trim ring out of the grooves in
the CB unit. Then slide the faceplate trim ring down
and off.
