Page 6 of 10
M-KIT100/101/102 Assembly Instructions
181-03001
These instructions must be followed exactly. Failure to follow these instructions could damage the product or result in injury to persons using or
assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulting from failure to properly
assemble the product in accordance with these instructions.
Maxon Furniture Inc.
Customer Service: 1-800-876-4274
While holding the Angle Alignment Bracket in
9.
place, connect the second Panel by inserting
the I-Beam Panel Connectors as directed in
Steps 5-6.
Add one PLNR4236 Panel to the L-shape by
10.
inserting one Straight Alignment Bracket
between the adjoining PLNR4236 Panels and
connecting with the I-Beam Panel Connectors
(Figure 5).
Trim the excess I-Beam Panel Connector
11.
length with wire cutters or snips as directed
in Step 6.
TIP! Leveling the panels by adjusting
the Glides may ease the I-Beam Panel
Connector installation.
To secure the PLNR4236 Panels, center the
12.
Lock Bar over two PLNR4236 Panels (Figure
5) and attach with two #8 x 1/2” Flat Head
Self Drilling Screws (Figure 6).
Repeat Steps 3 - 6 to attach the remaining
13.
PLNRCP42 Corner Post to the assembled
PLNR4236 Panels (Figure 7).
Repeat Steps 7 - 9 to attach the remaining
14.
PLNR4236 Panel. This completes the
installation of the PLNR4236 Panels.
Figure 7
Figure 6
Figure 5
Straight Alignment
Bracket
Panel Connectors
Lock Bar
#8 x 1/2" Phillips
Flat Head Screw
TOP VIEW
#8 x 1/2" Phillips
Flat Head
Lock Bar centered
over panels.
Corner
Post
PLNR4236
Panel
