Low temperature burners - INDITHERM
®
w w w . m a x o n c o r p . c o m
combustion systems for industry
MAXON reserves the right to alter specifications and data without prior notice.
© 2008 Copyright Maxon Corporation. All rights reserved.
1 - 2.3 -
22
E - m - 7/08
Maintenance and inspection
Safety requirements
Regular inspection, testing and recalibration of combustion equipment according to the installation’s manual are an integral part of
its safety. Inspection activities and frequencies shall be carried out as specified in the installation’s manual. Perform the following
activities at least annually as part of a recommended preventative maintenance routine:
Inspect burner internal parts for wear and oxidation, paying special attention to the refractory of the burner block
(when applicable).
Inspect associated control instruments and devices for function with particular attention to all safety permissive switches.
Perform leak tests on fuel shut off valves according to any schedule established by the authority having jurisdiction.
Visual inspections
Regular visual inspection of all connections (air and gas piping to the burner, bolting of the burner mounting flange and burner
flame shape and aspect are essential for safe operation.
Recommended spare parts
Keep local stock of spark igniter. It is not recommended to keep local stock of other burner parts. Consult installation manual for
burner spare parts and system accessories.
