Maxon DMD-22, Руководство по эксплуатации для пользователя

Страница: 14 / 40

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
14
9. Bolt on the main housing cover
as shown in FIG. 14-3 . Torque
the 5/16”-18 cover bolts from
10 to 14 lb-ft .
CAUTION
Main housing cover must be
correctly secured to prevent it
from becoming a hazard.
POWER UNIT
(MANUAL CLOSE POWER UNIT SHOWN)
FIG. 14-2
POWER UNIT
(REF)
RESERVOIR
6. Raise platform to bed height (FIG. 14-1) .
Continue to hold UP/DOWN control
switch for 30 - 60 seconds to circulate
hydraulic
fl uid through slave cylinder
and reservoir (FIG. 14-2) . Release UP/
DOWN control switch.
PLATFORM AT BED HEIGHT
FIG. 14-1
7. Repeat instructions 1 through 5 ,
two times. Keep the platform open
and cover removed.
NOTE: Three cycles of draining, fi lling,
and circulating hydraulic fl uid
should be enough to fi ll the sys-
tem with new hydraulic fl uid.
8. Lower platform to the
ground (FIG. 14-3) .
BOLTING ON COVER
FIG. 14-3
UP/DOWN
CONTROL
SWITCH
BOLT,
LOCK WASHER &
FLAT WASHER
(3 PLACES)
COVER