TRANSFERENCIA DE CARGA
DE UN VEHÍCULO A OTRO
10
During load transfer, do not use the platform as a bridge plate.
Service, maintenance, verification and repair
Before starting any maintenance work, the Slidelift must be secured against unforeseen
movement.
Check that all screw connections are tight. Check that cables and hoses are able to move freely.
Correct shearing and chafing points on cables and hoses. Immediately replace damaged hydraulic
hoses with ones of the same quality. Note down the replacement in the control book.
During cleaning it should be ensured that no moisture penetrates the power pack or the control
box. The bearing areas should not be cleaned with high pressure or steam jets, as this may allow
dirt and moisture to penetrate into the bearing.Check all hydraulics for leaks. With the Slidelift
platform completely lowered, check the oil level in the unit's tank (dipstick on the oil filler neck
cover). If necessary, top up with hydraulic oil of class HLPD 22 (temperature range 5°F to +122°F).
The maximum oil level has been reached when the dipstick dips 3/8 “ into the oil.
Carry out an annual oil change and clean the suction filter. Carry out the oil change before any
period of frost, in order to prevent the hydraulic unit from freezing up.
Hydraulic oil - recommendations
OIL SPECIFICATIONS
Grade ISO - (32)
Gravity, API - 29.5 Degrees
Pour Point, F - (-54 Degrees)
VISCOSITY
@ 40 Degrees C - 31.2 cSt
@ 100 Degrees C - 6.2 cSt
VISCOSITY INDEX - 154 VI
Flash Point, F - 325 Degrees
