© Copyright 2014. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: [email protected]
Page : 2
REV: 6/16/2014
Operating Instructions ELLFXXXXY50H Series
MaxLite®
StaxMax
TM
LED Flood Lights
Figure 3
Mounting Instructions
Before installation, ensure if power supply is disconnected. Cables must be connected in accordance to instruction and
proper standing rules. Read through entire installation process before beginning.
1. Mounting of the pole tenon mounting bracket to the fixture mounting bracket requires the merging of
components 2 and 3. As depicted in
Figure 1
, one unit of component 4, 5, 6, and 8 are fastened
together in this order for all (6) mounting points.
2. The LED modules are then joined to the mounting bracket utilizing one unit of component 4, 6, and 7
at each end of the HBMB bracket (component 2).
See Figure 2
3. Use arrow tip located on mounting bracket as
reference guide for leveling each LED module
individually. Angle adjustment indicators (side
protractor) can be found on casting. -60 Deg. to
60 Deg. options with a max torque setting of 25
ft. lb.
4. Level the LED fixture to desired angle. . -60
Deg. to 60 Deg. options with a max torque
setting of 25 ft. lb.
5.
Securing the bracket assembly to the desired
mounting pole requires (7) set screws,
component 7.
See Figure 3
6. Supply AC power to the LED Flood Light.
7. Enjoy your new StaxMax LED High Output
Flood Light.
Figure 1
Figure 2
