© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 4
REV: 10/14/21
Operating Instructions ARE Series
MaxLite ARE High Efficiency Area Luminaires
®
Installation & Operation
B. Slipfitter Mounting:
This fixture can be mounted 0 to 90° in either direction aiming in 30° increments (see
FIG. 2
) and the slipfitter fits on industry
standard 2 3/8" OD tenons or brackets. Connect the power leads properly, make the wiring connections (see
FIG. 9
) and lay the
wires in the pole.
1.
Once completed, insert the slipfitter onto the pole (see
FIG. 10
)
2.
Tighten the four M8x20 bolts on the slipfitter and secure it to the pole (see
FIG. 11
).
3.
To aim the fixture, loosen the M16x45 center knuckle bolt on the arm, adjust the aim 0 to 90° in either direction.
4.
Inspect installation to ensure fixture is secure.
Fig. 9
Fig. 10
Fig. 11
Mounting Engineering Drawings
ARM:
8.1”
5.
6”
0
78
78
4.
9”
SLIP FITTER:
2 3/8"
0
90
90
3”
8.2”
3”
