© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 3
REV: 10/14/21
Installation & Operation
Operating Instructions ARE Series
MaxLite ARE High Efficiency Area Luminaires
®
A: Flexible Arm Mounting: (Continued)
4.
Secure Pole mount bracket to the pole with 2 M10×50 internal Hex head bolts. (See
FIG. 6
) Wire the fixture
using UL listed water proof wire connectors. Use the wiring diagram as shown. (See
FIG. 7
).
5.
Secure the side cover plate on the mounting arm using the 4 M3 screws. (See
FIG. 8
)
6.
To aim the fixture, loosen the M16x45 center knuckle bolt on the arm, adjust the aim 0 to 78° in either direction.
7.
Inspect installation to ensure fixture is secure.
Fig. 6
Fig. 7
Fig. 8
Square Poles:
Round Poles:
