Maxkon WF-40S, Руководство пользователя

Страница: 13 / 15

13
The remote control operates with one 3V CR2025 Lithium Cell Battery (included). Remove the
protective sheet between the battery and the contacts in order to operate (see Page 7).
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating.
Failure to do so could result in
electric shock
,
fire
, or
personal injury
.
Remote Control Set-up

Fig. 1: Remove the plastic sheet from the end of the remote control to allow the battery to
touch the electrical contacts. If the sheet is not removed, the remote control will not work.

Fig. 2 : To install or replace the battery, press the button to allow the battery case to slide out.
Position the battery according the drawing, and slide the case back in to the remote.
Fig. 1 Fig. 2
NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion . Dispose of batteries at your local hazardous material processing center.
ALWAYS replace the battery in the remote control with the same type of battery .
Failure to do so may result in personal injury or property damage .
NOTE : Remote control battery used depends on the remote control type which selected above.
NEVER dispose of batteries in fire. Failure to observe this precaution may result in an explosion.
Dispose of batteries at your local hazardous material processing center.